Adjusting screws
Linear stages
XY stages
Elevator stages
Rotation and swivel stages
Twist and tilt stages
Accessories positioners
Do you want more than components and benefit from the plus of a system? Find out more about OWIS Engineering!
Plus with OWIS Engineering
PR 60-D60-BP
- 3D adjustment: 2 tilting axes and 1 rotation axis
- fine-thread spindles, with clamping device
- installation on measuring and translation stages or on optical tables
NT 40
- angular adjustment range ±6°
- fine-thread screws or micrometers
- installation on slide RT 40 and RT 65 or on pin
NT 65
- angular adjustment range +5,1°/–3,1°
- fine-thread screws or micrometers
- installation on slide RT 65, pin or positioner
DNT 40
- coarse adjustment (360°)
- fine adjustment with fine-thread screws or micrometers
- installation on slide RT 40 and RT 65 or on positioner
DTT 100-FGS
- fine-thread screws
- 3D adjustment
- adjustment range of up to ± 12°
FGS 6
- travel range 3 / 4 / 7.5 / 10 / 12.5 / 15.5 / 18 mm
- mounting thread M6 x 0.5
- spindle pitch 0.25 mm / axial load 30 N
FGS 7
- travel range 7.5 / 10 / 15.5 mm
- mounting thread M6
- spindle pitch 0.25 mm / axial load 30 N
FGS 9
- travel range 17 / 35 mm
- mounting thread M9 x 0.5
- spindle pitch 0.35 mm / axial load 50 N
FGS 10
- travel range 17 / 35 mm
- mounting thread M10
- spindle pitch 0.35 mm / axial load 50 N
FGS 15
- travel range 5 / 7.5 mm
- mounting thread M6 x 0.5
- spindle pitch 0.15 mm / axial load 10 N
MS 6
- measuring range 6 / 12 mm
- mounting thread M6 x 0.5
- spindle pitch 0.25 mm / axial load 25 N
MS 9
- measuring range 10 / 15 mm
- mounting thread M9 x 0.5
- spindle pitch 0.25 mm / axial load 30 N
MS 12
- measuring range 25 / 50 mm
- mounting thread M12 x 0.5
- spindle pitch 0.5 mm / axial load 100 N
MS 10
- accuracy according to DIN 863
- indication range 12 mm and 15 mm, depending on the type
- spindle pitch 0.10 mm
- setting sensitivity about 200 nm per hand, approx. 20 nm with offset screwdriver
MSD 9-15
- measuring range 0,2 mm (fine) und 15 mm (coarse)
- mounting thread M9 x 0.5
- spindle pitch 0.025 mm (fine) and 0.25 mm (coarse) / axial load 15 N