Do you want more than components and benefit from the plus of a system? Find out more about OWIS Engineering!
Plus with OWIS Engineering![](/uploads/tx_aimeos/1.d/files/b/5/b576bf00_K_80_pic.png)
K 80
- for use with SYS 90
- installation with one central M8, two M4 or two M6 threaded holes
- installation in SYS 90 using a base plate on slide RT 90
![](/uploads/tx_aimeos/files/2/f/2f7c8609_498593975.png)
KSH 25
- for use with SYS 25
- for optics with ø 12.5 mm / 12.7 mm (0.5") and a thickness of 3 mm
- installation on two slides RT 25 or on pin
![](/uploads/tx_aimeos/files/1/6/16bdd3b8_308038386.png)
KSH 40
- for use with SYS 40
- for optics with ø 25 mm / 25.4 mm (1") and thickness of 5 mm
- installation on two slides RT 40 or on pin
![](/uploads/tx_aimeos/files/2/9/29408da6_806681523.png)
KSH 65
- for use with SYS 65
- for optics with ø 38.1 mm (1.5") and a thickness of 6 mm
- installation on two slides RT 65 or on pin
![](/uploads/tx_aimeos/files/8/3/8334c532_815633600.png)
KSH 90
- for use with SYS 90
- for optics with ø 50 mm / 50.8 mm (2") and a thickness of 10 mm
- installation on slide RT 90 (with adapter plate) or on pin
![](/uploads/tx_aimeos/files/b/1/b130bee0_607538760.png)
KSHM 25
- for use with SYS 25
- for optics with ø 12.5 mm / 12.7 mm (0.5") and a thickness of 3 mm
- DC geared motor, mechanical limit switches
![](/uploads/tx_aimeos/files/9/c/9ca3dbe2_1765794914.png)
KSHM 40
- for use with SYS 40
- for optics with ø 25 mm / 25.4 mm (1") and a thickness of 5 mm
- DC geared motor, mechanical limit switches
![](/uploads/tx_aimeos/files/7/c/7ced272a_2041277752.png)
KSHM 65
- for use with SYS 65
- for optics with ø 38.1 mm (1.5") and a thickness of 6 mm
- DC geared motor, mechanical limit switches
![](/uploads/tx_aimeos/files/6/e/6e35c6aa_509372501.png)
KSHM 90
- for use with SYS 90
- for optics with ø 50 mm / 50.8 mm (2") and a thickness of 10 mm
- DC geared motor, mechanical limit switches
![](/uploads/tx_aimeos/1.d/files/6/7/67b7e7ad_FAPO_40_pic.png)
FAPO 40
- for use with SYS 40
- very sensitive adjustment of X and Y
- fine-thread screws or micrometers, SMA or FC adapter
![](/uploads/tx_aimeos/1.d/files/9/8/9894c821_FAPO_50_pic.png)
FAPO 50
- highly sensitive adjustment of X, Y and Z axis
- micrometers MS 10
- FC adapter (optionally SMA adapter)